Quincy Compressor QR-25 Series Instruction Manual page 6

DANGER !
Do not remove or paint over any DANGER!, WARNING!, CAUTION!, or
instructional materials attached to the compressor,
Lack of information
regarding hazardous conditions can cause property damage or personal injury.
Periodically check all pressure relief valves for proper operation.
. Do not change the pressure setting of the pressure relief valve, restrict the
function of the pressure relief valve, or replace the pressure relief valve with
a plug.
. Do not install a shutoff valve in the compressor discharge line without first
installing a pressure relief valve of proper size and design between the shutoff
valve and the compressor.
.Do not use plastic pipe, rubber hose, or lead-tin soldered joints in any part of
the compressed air system.
Alterations must not be made to this compressor without Quincy Compressor's
approval.
Be sure that all tools, shipping and installation debris have been removed
from the compressor and installation site prior to starting the compressor.
Do not operate the compressor in excess of the A. S.M. E. pressure vessel rating
for the receiver or the service rating of the compressor, whichever is lower.
Make a general overall inspection of the unit daily and correct any unsafe
situations.
Reckless behaviour of any kind involving compressed air is dangerous and
can cause very serious injury
to
the participants.
c Provisions should be made to have the instruction manual readily available
to the operator and maintenance personnel. If for any reason any part of the
manual becomes illegible or the manual is lost, have it replaced immediately.
The instruction manual should be read periodically to refresh one's memory.
It may prevent a seriouk or fatal accident.
Never use a flammable or toxic solvent for cleaning the air filter or any parts.
Air used for breathing or food processing must meet O.S.HA. 29
C.F.R. 1910.134 or F.DA. 21 C.F.R. 178.3570 regulations. Failure to
do so may cause severe injury or death.
W~NING !
Do not operate a Quincy Compressor in excess of 250 p.s.i.g. unless
it has been tested and certified for high pressure application by
Quincy Compressor prior to shipment.
The owner, lessor or operator of any compressor unit manufactured by
Quincy Compressor is hereby warned that failure to observe the above safety
precautions may result in serious injury to personnel and/or damage to
property.
QR-25 Series
QUINCY COMPRESSOR
52201-104
2
February 1994