Operations; General Operation - Pyle PSBV200BT Owner's Manual

OPERATIONS

1. GENERAL OPERATION

1) Press the POWER button on the front panel of the unit to turn the
unit to Standby mode.
2) Press the STANDBY button on the unit or remote control to power
on the unit.
3) Press the INPUT button on the unit or remote control repeatedly to
select the input sources to USB, CARD, FM radio, Blue, AUX1,
AUX2, PC as desired.
4) Hold Press the (
on remote control to adjust volume as desired. Short press (
) for choose PRE or NEXT song.
5) Press the Bass +/- buttons on the remote control to adjust the
sound level of woofer.
6) Press the 3D button on the remote control to turn the Surround
Sound Effect ON, press again to turn it OFF.
7) During listening, press the MUTE button on remote control to turn
off the sound temporary (MUTE will appear on the display), press
again to turn the sound back on.
8) During listening, press the RESET button on the remote control to
reset the sound level to default settings.
9) When finished listening, press the STANDBY button on the unit or
remote control to turn off the unit(Standby mode).
NOTE: If you will not use the unit for long period of time, press the
POWER button on the front panel of the unit to cut off the AC
supply.
or )VOL +/- buttons on the unit or press it
10
or