Operation; Starting The Engine - Husqvarna DT22 Operator's Manual

Starting the engine

Check that all daily maintenance as described
in the maintenance schedule has been
performed. Check that there is sufficient fuel in
the tank.
Fuel valve
Open the fuel valve. Turn the lever all the way
to the right.
Choke
When starting the engine warm, the lever
should be in the right position; see the
illustration.
When starting the engine cold or partially
warm, turn the lever completely or partly to the
left.
Move the lever back to the right once the
engine starts. When the engine is cold, it may
be best to move the lever back in several
stages. Find the position where the engine
runs smoothly.
Throttle control
Set the throttle with about 1/3 of full throttle
from idle. This means 1/3 of the way from the
rightmost end stop.
Engine switch
Turn the engine switch clockwise to ON.
22

OPERATION

8011-072
8011-035
8011-034
8011-071