Download Print this page
Nitecore TM 36 User Manual

Nitecore TM 36 User Manual

Led flashlit

Advertisement

Quick Links

The All-Round Flashlight Expert
Features
• The world's smallest LED rechargeable searchlight with a maximum throw of 1100
meters
• Utilizes LUMINUS SBT-70 LED
• Integrated multi-function OLED display
• Thermal protection circuit prevents overheating
• Includes ultra-high performance NBP52 battery pack to double runtime
• Intelligent charging circuit with voltage detection charges safely and rapidly
• Eight rapidly switchable brightness levels and modes to select from
• Innovative single button two-stage switch provides a user-friendly interface
(Patented)
• Integral power indicator in the switch displays remaining battery power (Patented)
• Optimal heat dissipation to improve overall performance
• Toughened ultra-clear mineral glass with anti-reflective coating
• Integrated "Precision Digital Optics Technology" provides extreme reflector
performance
• Constructed from aerospace-grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX-8 (submersible to two meters)
Dimensions
Length: 278mm (10.94")
Head diameter: 90 mm (3.54)
Tube diameter: 50mm (1.97")
Weight: 1344g (47.41oz) (with battery pack)
Accessories
Standard charger adapter, quality sling and spare O-ring
Battery Options
NBP52 ultra-high performance Li-ion rechargeable battery pack
Specifications
Capacity
Voltage
Charging Current
1A(Trickle charge)/2A(Rapid charge)
Charging Port
3.5mm 12V DC Adpater / 4.5mm 12V DC Adpater
Output & Runtime
TURBO
HIGH
1800
800
LUMENS
LUMENS
LUMENS
1
45
5
30
h
min
h
min
1100m
310000cd
(Peak Beam Intensity)
1.5m
(Impact Resistant)
IPX-8, 2m
(Waterproof AND Submersible)
NOTICE
The above data has been measured in accordance with the international
flashlight testing standards ANSI/NEMA FL1 using the NItecore NBP52 battery
pack under laboratory conditions. The data may vary during real-world use
due to battery type, individual usage habits and environmental factors.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to
develop the ANSI FL1 standard of measurement. Product testing data is in
accordance with these internationally recognized scientific standards.
Operation Instructions

Battery installation

Tighten the NBP52 battery pack as instructed
Note: After tightening the NBP52 battery pack, "NITECORE" will be displayed
on the OLED screen for 2.5 seconds followed by battery voltage (accurate to
0.01V) for 4 seconds. After this the TM36 will enter into standby mode.
Parameters
65W(2300mAh×8)
3.7V
MID
LOW
LOWER
400
200
50
LUMENS
LUMENS
11
21
67
h
h
h
(Beam Distance)
Thanks for purchasing NITECORE!
®
TM 36
Charging the TM36
Connect the charging cable to the flashlight and the A/C power adapter to the
wall outlet as shown in the adjacent image.
1. Under normal charging conditions, the on/off switch's blue indicator light will
blink twice every second with the OLED screen display "Charging..." and
battery voltage.
2. If a problem is detected while charging the TM36 will stop charging, the blue
indicator will blink rapidly and the OLED display will show the word "ERROR".
This is usually caused by faulty or incorrectly inserted batteries.
3. When charging is complete, the blue indicator will remain on,
and"Chg.Finished" along with battery voltage will be displayed on the OLED
screen.
The NBP52 battery pack can also be recharged independently. As shown, plug
one end of the adapter to the battery pack charging port (1A, 3.5mm), and plug
the other end to an outlet.
The integral blue charging indicator of NBP52 battery pack will blink to indicate
charging process:
1. When battery pack is being recharging, the blue indicator will blink rapidly.
2. When battery power level reaches 98%, the blue indicator will blink slowly.
3. When battery pack is fully charged, the blue indicator will illuminate steadily.
NOTE:
1. Charging the flashlight or the battery pack directly will require charging time
of approximately 16 hours.
2. Charging time can be reduced by half to 8 hours if the NBP52 battery pack is
recharged via the rapid charging port (2A, 4.5mm) using an optional 2A
adapter.
User Manual

Advertisement

loading

Summary of Contents for Nitecore TM 36

  • Page 1: Battery Installation

    2. When battery power level reaches 98%, the blue indicator will blink slowly. NITECORE (SYSMAX) is a member of PLATO, participating in and helping to 3. When battery pack is fully charged, the blue indicator will illuminate steadily.
  • Page 2 Extended operation in Turbo mode will cause the tube temperature of display switch. To cycle through the readings, press the display button in TM36 to continually rise, making it too scalding to hold. Thus, Nitecore sequence. does not recommend using the TM36 in Turbo mode for extended 2.