Physical Details; Hardware Installation - Planet ICA-108 User Manual

2.2 Physical Details

1. LAN Socket
The LAN port is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX
Fast Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the
transmission speed of the network automatically. Please use Category 5 "straight" cable to
connect the ICA-108/108W to a 100Mbps Fast Ethernet network switch or hub.
Note: In case you need to connect the device to PC or notebook directly, you should use a
cross-over cable instead.
2. Audio Output
Audio output jack allows this device to output audio or alerting sound.
3. DC Power Jack
The DC power input jack is located on the ICA-108/108W. The input power is 5V DC.
Note: Using the power supply that is not the one included in ICA-108/108W packet will
cause damage and void the warranty for this product.
4. Reset to Default Button
This button is hidden in the pinhole beside the DC Power Jack. Please refer to the Appendix
A in this manual for more information.

2.3 Hardware Installation

1. Attach the ICA-108/108W with the included stand.
2. Locate the ICA-108/108W on the table or fix it onto ceiling or wall.
3. Plug an Ethernet cable into the ICA-108/108W.
4. Assemble the antenna to ICA-108W.
5. Connect the external power supply to ICA-108/108W.
6. Done.
LAN Socket
Audio Output
8/65
DC 5V Power Jack
Reset to Default Button