Navigating Around The Sbs User Interface - Wiredocean SBS 1000 Owners Handbook And Installation Instructions

Make sure that your computer is set to request an IP address from
the SBS using DHCP. If not, see Sections 4.1 and 5.1 of this
handbook.
If you see the screen below then the User Access Control has been
enabled. This requires a password to access the SBS User Interface
- other functions of the SBS will still be running but you will not be
able to start or stop connections. Please see Chapter 4.4 - Access
Control - for more details.
2.3

Navigating Around the SBS User Interface

The User Interface functions are grouped under three tabs:
The CONNECT tab is used to connect and disconnect from
the internet and to view the status of the current connection.
The SETTINGS tab is used to manage the SBS and view SBS
status information under three tabs:
The UPLINK tab allows editing of existing uplinks and
►
creation of new uplinks.
The
►
information.
The GENERAL TAB provides access to SBS network
►
addresses, SBS status information, access control,
technical configuration options, the update button and
the shutdown button.
The STATS tab allows access to historical usage information.
2. Operating the SBS
DOWNLINK tab
Page 5
provides downlink status