Table of Contents
Advertisement
IX.
Setup – Step 6: Configure All Uplinks
Configure any additional uplinks as required (See Section X below).
Ensure that the Inactivity Timeout is set to the desired level for each
uplink device (See Section 4.2 of the Owner' Handbook). The
Inactivity Timeout function is not available for GPRS preset uplinks,
or for uplinks connected via the WAN port.
The installation is now complete and should be carefully tested.
The main sections of the Owner's Handbook should now be
used as the reference for operating the SBS.
X.
Adding and Editing Uplinks
Uplinks can be added and edited through the User Interface as
follows:
1. Click on the "SETTINGS" tab and then the "UPLINK" tab.
2. To edit an uplink, select it from the "Edit Connection" drop-
down menu. To add one, choose "Add a new uplink" from the
same menu.
3. Choose the relevant uplink type from the "Connection type"
drop-down menu. The available fields will change according to
the connection type selected. The different types of uplink and
their settings are as follows:
I
n
s
t
a
l
l
a
t
i
o
n
I
n
s
t
a
l
l
a
t
i
o
n
Page 9
I
n
s
t
r
u
c
t
i
o
n
I
n
s
t
r
u
c
t
i
o
n
s
s
Advertisement
Chapters
Table of Contents
