Table of Contents
Advertisement
GPRS Preset Uplinks:
The SBS has preset settings for a variety of GSM modems
and cellular network operators. Select your phone type from
the "phone" drop-down menu. Select your service provider
from the "network operator" drop-down menu. Choose the
port, port speed and flow control as above.
Router Uplinks:
If you have a router-based uplink device (3G, VSAT and Wi-
Fi/WiMAX) on the same network as your SBS, you can use
that router as the uplink. Select "router" from the "Connection
type" drop-down menu. The only setting is the IP number of
the router.
WAN port Uplinks:
To connect a router-based uplink device (3G, VSAT and Wi-
Fi/WiMAX) to the SBS using the D-Link DUB E100 USB to
Ethernet converter:
Select WAN Port from the "Connection type" drop-down
►
menu.
Select the required WAN Port number from the "WAN port
►
interface" drop-down menu. If there is no USB to Ethernet
converter plugged in to a USB port, the "WAN port
interface" drop-down menu is replaced by text reading
"there is no WAN port available"
Set WAN Port Network Settings.
►
In most cases, it is advisable to allow the router that
is plugged into the WAN port to assign the IP
addressing and DNS for the WAN port via DHCP. To
enable the DHCP client on the WAN port, check the
"Get IP address automatically" checkbox.
If the WAN port's address is to be set manually,
uncheck the checkbox, and enter the IP address of
the other router in the "Gateway" field, the IP address
you want the SBS's WAN port to use in the "WAN
port IP number" field, the network's netmask in the
"WAN port netmask" field, and the required DNS
server's IP number in the "DNS server" field.
I
n
s
t
a
l
l
a
t
i
o
n
I
n
s
t
a
l
l
a
t
i
o
n
Page 11
I
n
s
t
r
u
c
t
i
o
n
I
n
s
t
r
u
c
t
i
o
n
s
s
Advertisement
Chapters
Table of Contents
