Table of Contents
Advertisement
2.2
Accessing the SBS User Interface
Once the SBS has been installed and is turned on you can manage
both the SBS and your internet connection through the User
Interface. The User Interface enables functions such as connecting,
disconnecting,
switching
connection statistics, etc to be performed through a web browser on
any connected computer.
To access the SBS User Interface:
1.
Open a web browser on a
computer connected to the SBS.
2.
Type "wiredocean" in the address
bar.
3.
Press Enter.
This will take you to the User Interface shown below.
Not all versions of all web browsers work in exactly the same way, so
if typing "wiredocean" doesn't get a response you may need to enter
an IP address instead. The SBS is shipped with the default IP
address of 192.168.1.1, so try typing "http://192.168.1.1" instead of
"wiredocean".
2. Operating the SBS
uplinks,
switching
Tip:
For easy access to the
User Interface set it up
as
favourite at the top of
your web browser.
Page 4
satellite,
viewing
a
shortcut
or
Advertisement
Chapters
Table of Contents
