JVC VN-H37U Instructions Manual page 103

B
Video control
menu
C
Specified Time
Playback menu
[Playback] button Press the [Playback] button to play videos recorded at the specified date and
Controls the video playback state.
F
G
J
K
M
Item Description
A
Returns to the previous
frame, and then pauses
playback.
B
Starts reverse playback.
C
Pauses playback.
D
Starts playback.
E
Advances to the next frame,
and then pauses playback.
F
Returns to the oldest frame,
and then pauses playback.
G
Returns to the previous event,
and then pauses playback.
H
Advances to the next event,
and then pauses playback.
Memo:
● Buttons other than button D and button E are only used with I Frame
playback; therefore, the playback frame rate may be lower than the
recording frame rate, depending on the setting of [I Frame Interval].
Specify the date and time before starting playback.
time.
Memo:
● If there is no video recorded for the specified date and time, video near
that date and time will be played.
● Playback of videos being concurrently recorded may not be possible
within a certain amount of time between the current time and the playback
time, depending on the frame rate setting for the recorded videos.
The necessary time between recording and playback is approximately 20
minutes at 1 fps, 5 minutes at 3 fps, and 1 minute at 5 fps.
A B C D
N
Item
I
J
K
L
M
N
O
* The [Set values] in bold letters are factory defaults.
E
H
I
L
O
Description
Advances to the most recent
frame, and then pauses playback.
Reverses the playback position.
Selects the fast-forward and
reverse speeds.
[Set values: x1/2, x1, x3, x10, x30,
x60]
Fast-forwards the playback
position.
Returns by the specified length of
time, and then pauses playback.
Selects the length of time to move.
[Set values: 10s, 15s, 30s, 1m,
10m, 30m, 1h, 6h, 12h, 24h]
Advances by the specified length
of time, and then pauses playback.
103