JVC VN-H37U Instructions Manual page 43

M
SD Card Recording Mode
Trigger1, Interval,
Trigger2
Sunday to Saturday
Pre-Trigger
Post-Trigger
Memo:
● The displayed setting items for [Trigger1, Interval, Trigger2], [Pre-Trigger], [Post-Trigger], and
[Sunday] to [Saturday] vary depending on the selected SD card recording mode, and each can be
set separately.
Condition 1: Sets a recording condition.
[Set values: Position, Motion detection, Day/Night,
Tampering Detection,Time]
Interval: Unavailable.
Condition 2: Unavailable.
Memo:
● Items set via [Trigger1] must also have their functions set to
[ON] via the corresponding setting pages.
Sets the start and end time of recording for each day of week.
[Set values: Specify the time period for invoking the action,
Specify the time period to stop the action,
Activated at all times, Stopped at all times]
If you have selected ASpecify the time period for invoking the actionB
or ASpecify to stop the actionB, you must set the time period.
[Set values: Start time, End time]
Sets a trigger time before recording (a recording time before alarm
input) in seconds.
[Set values: 0 to 5 to 60 sec]
Sets a trigger time after recording (a recording time after alarm
input) in seconds.
[Set values: 0 to 5 to 60 sec]
* The [Set values] in bold letters are factory defaults.
43