JVC VN-H37U Instructions Manual page 39

A
Storage Mode
If A Storage Mode is set to "FTP Record", FTP Record options will be displayed.
B
FTP Server
C
Path
D
User Name
E
Password
F
FTP Record Mode
G
Constant
Encoder
Interval
File Naming
Selects a record mode. Depending on the selected record mode,
B options vary.
[Set values: OFF, FTP Record, SD Card Record]
Sets an IP address of FTP server or FQDN.
Sets a path name. If the [Path] is left blank, the FTP transfer is
made to the home directory of FTP server.
Memo:
● To make an FTP transfer to a directory locating under the
home directory:
Sets the directory name in the [Path] field.
Separate directories by delimiter A/B from each other.
Example: subdir1/subdir2
● If A/B is set at the beginning of directory name, the destination
directory of FTP transfer depends on the FTP server.
Enters a user name.
Enters a password. When a user name is specified, A******B will
be displayed.
Sets an FTP recording mode.
Depending on the selected FTP recording mode, G options vary.
Constant : Transfers JPEG images to the FTP server at each
specified time.
Alarm : Transfers JPEG images around the time when the specified
conditions are met to the FTP server.
Constant+Alarm : Enables both Constant and Alarm.
[Set values: Constant, Alarm, Constant+Alarm]
Sets the continuous recording.
Selects an Encoder for continuous recording.
Memo:
● You can select an Encoder No. for JPEG file encoding.
Sets a recording interval by seconds.
[Set values: 1 to 65535 sec]
You can select any of three (3) formats of recording file names.
If you select AAutoB, a file name is created based on the year,
month, day, hours, minutes, seconds, and a number.
Example: 20111114161032-001-2.jpg
If you select AManual1B, a file name is created based on the user-
defined character string which is added by year, month, day,
hours, minutes and seconds.
Example: Camera1_20111114161032001.jpg
If you select AManual2B, a file name is created based on the user-
defined character string only.
Example: Camera1.jpg
[Set values: Auto, Manual1, Manual2]
* The [Set values] in bold letters are factory defaults.
39