JVC VN-H37U Instructions Manual page 13

Network
A
IP Setting
B
IP Address
C
Subnet
Mask
D
Default
Gateway
Time
E
Time (read
only)
F
Time Zone
G
PC Time to
Camera
Sets the DHCP client function.
To enable the DHCP, connect the camera to the network environment where
the DHCP server is running.
If you have AEnabledB the DHCP but the DHCP server does not exist, the
camera will start with the IP address of 192.168.0.2 and the subnet mask of
255.255.255.0 approximately 2 minutes after startup. For the IP address
details, see the "Instructions (IP Address Settings)."
[Set values: DHCP Disable, DHCP Enable]
Sets the IP address of camera.
[Factory default: 192.168.0.2]
Sets the subnet mask of camera.
[Factory default: 255.255.255.0]
Sets the default gateway of camera. Enter 0.0.0.0 if you do not want to set a
default gateway.
[Factory default: 0.0.0.0]
Displays the clock time of camera.
The time transmitted by camera is recorded in the JPEG header.
Memo:
● You cannot change the time with this item. For details about the time
settings, see the "Time" page. (A Page 63)
Sets a time zone.
[Set value: (GMT-12:00) - (GMT) UTC - (GMT+12:45)]
Click the [Set] button to set the time of PC on the camera.
Memo:
● Your PC's time zone cannot be applied. Only the time will be set.
13