JVC VN-H37U Instructions Manual page 20

Internet Explorer Setting
Settings (continued)
Camera Page (continued)
H
3D DNR
I
White Balance
ATW-Wide
ATW-Narrow
AWC
AWC R-Gain Sets the gain of R (red) when in the AWC mode.
AWC B-Gain Sets the gain of B (blue) when in the AWC mode.
20
The noise on the screen will be reduced.
[Set values: OFF, Low, Mid, High]
Memo:
● With a moving object, the higher the noise reduction (as you select Low -
Mid - High), the more likely there will be an afterimage.
● You cannot select this when the frame rate is set to 25 fps.
Adjusts the white balance. White balance can be adjusted for a light source
with a color temperature range of 2300 K to 10000 K.
[Set values: ATW-Wide, ATW-Narrow, AWC]
Switches to the Auto-Tracking White Balance (automatic color temperature
tracking) Wide mode. Adjusts the white balance automatically according to
the color temperature of the light. (Color temperature: 2300 K to 10000 K)
Switches to the Auto-Tracking White Balance (automatic color temperature
tracking) Narrow mode. Adjusts the white balance automatically according to
the color temperature of the light. (Color temperature: 3200 K to 8000 K)
Switches to the Auto-White Balance Control mode. In the AWC mode,
values entered for the [AWC R-Gain] and [AWC B-Gain] items are applied to
white balance.
Pressing the [OnePushAWC] button replaces the [AWC R-Gain] and [AWC
B-Gain] values with the values of the AWC execution results.
Memo:
● Execute by filling the screen completely with a white object in a location
with lighting conditions similar to those of the object you are going to
shoot.
● Even when white balance is set to "ATW-Wide" or "ATW-Narrow",
pressing the [OnePushAWC] button switches the mode automatically to
AWC.
● If you press the [OnePushAWC] button, the changes you made before
pushing the button will be stored and the AWC mode will be executed.
A larger value increases the redness, but a smaller value decreases the
redness.
[Set values: 0 to 107 to 255]
A larger value increases the blueness, but a smaller value decreases the
blueness.
[Set values: 0 to 65 to 255]
* The [Set values] in bold letters are factory defaults.