Advertisement
Quick Links
USER MANUAL
2.4GHz Digital Wireless Rearview
Camera with 7" Color LCD Monitor
FOREWORD
Congratulation. The Rearview Camera, when used as
described, will give you years of dependable service in
your car, truck, RV, or mini-van. We have taken numerous
measures in quality control to ensure that your product
arrives in top condition, and will perform to your
satisfaction.
Model: VTC700R
Model: VTC700R
Packing List
Rearview Camera
TFT-LCD Monitor
Suction Holder
Stamping Mount
Holder
In-Line Wire
Cigarette Lighter
Connectors
Adapter
The picture are for reference only, please refer to real subjects
For Sales Information Please Contact
RoadTrucker Inc (www.RoadTrucker.com)
Wilmington, NC 28411
(800) 507-0482 / (910) 686-4281
1
Video Cable
Monitor Power Supply
Cable
Grommet
8312 Sidbury Rd.
Antenna for
Camera and
Monitor
Screw
Advertisement
Related Manuals for Boyo VTC700R
Summary of Contents for Boyo VTC700R
- Page 1 USER MANUAL Model: VTC700R Packing List 2.4GHz Digital Wireless Rearview Camera with 7” Color LCD Monitor Rearview Camera Antenna for TFT-LCD Monitor Video Cable Camera and Monitor Suction Holder Stamping Mount Monitor Power Supply Screw Holder Cable FOREWORD In-Line Wire...
- Page 2 STRUCTURE For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 8312 Sidbury Rd. Wilmington, NC 28411 (800) 507-0482 / (910) 686-4281...
-
Page 3: Camera Installation
INSTALLATION These installation instructions do not apply to all vehicles. They are meant as only a general guide to big vehicle makes & models. For specific questions, contact your vehicle manufacturer. Consult your local motor vehicle laws on the use of this product. Do not attempt this if you are not knowledgeable with electrical installation practices. - Page 4 CAMERA POWER WIRE CONNECTION Insert the Insert the wire Crimp tap and to be attached. then close lock existing wire to 1. Once you have located the reverse light circuit, you be tapped. need to route the power wire to that location. You must securely fasten the power wire to prevent it from being caught on a vehicle component such as the trunk hinge.
- Page 5 Monitor Installation: b) Use the cigarette lighter adapter to connect the power socket of the monitor into the 12 Volt socket of the vehicle. 1. Fastening the 2. Peel off the suction cup holder backing paper of the to the back of the suction holder and monitor.
- Page 6 OPERATIONS 3. If the image on the LCD is unclear, adjust the contrast, brightness and mirror by toggling the buttons on the monitor. 1. Press the POWER button on the monitor for 3 seconds, the power indicator will illuminate. o Contrast Control: the 5 levels of LCD contrast can be adjusted by pressing the CONTRAST 2.
-
Page 7: Specification
SPECIFICATION 4. The VTC700R Monitor has a video output that can be used to display the Items Value Camera input on a larger monitor or TV screen. Connect the included RCA Imaging Sensor CMOS cable to the monitor and the other end into the AV input of the larger monitor... -
Page 8: Fcc Information
FCC INFORMATION This device complies with part Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the VTC700R and is the answer not in the manual?
Questions and answers