Quick-Start Demo - Bounty Hunter Quick silver Owner's Manual

Q UICK-START DEMONSTRATION
I. Supplies Needed
• A Medium-Size Nail
• A Nickel
II. Position the Detector
a. Place the detector on a
table, with the search coil
hanging over the edge.
(or better, have a friend
hold the detector, with
the coil off the ground)
b. Keep the search coil
away from walls, floors,
and metal objects.
c. Remove watches, rings and other jewelry or metal objects from
hands and wrists.
d. Turn off appliances or lights that cause electromagnetic
interference.
e. Pivot the search coil back toward the detector body.
III. Power Up
Press
touchpad. The detector
will beep several times
and the
setting will be indicated
on the right of the
display.
illuminated segments
indicates 3/4 sensitivity.
IV. Wave each Object over the Search Coil ( pass the flat side of the coins
parallel to the coil)
a.Notice a different tone for each object.
Low Tone:
Medium Tone: Nickel & Zinc Penny
High Tone:
b.Motion is required. Objects must be in motion over the
search coil to be detected.
6
the ON
sensitivity
Two
Nail
Quarter
• A Quarter
• A Zinc Penny (dated after 1982)