Heat & Glo XLR-N-AU Owner's Manual page 47

FIREPLACE OPENING
400 mm TO 410 mm
Figure 13.4 Required Fireplace Opening Height
Note: The lower cover panel must be pushed all the way
down. The outer fi nishing fl anges should line up. The
fi replace opening must be between 400 mm and 410 mm
for the decorative fronts to fi t correctly. See Figure 13.4,
Figure 13.5 and Figure 13.6.
Sealing Joints
All joints between the factory-installed non-combustible
board and 10 mm building material (dry wall, plywood,
wood composites, etc.) can be taped and sealed with
combustible drywall tape.
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. C • 3/10
LOWER FINISH FLANGE
BOTTOM COVER PANEL
Figure 13.5 Lower Cover Panel Positioned Incorrectly.
RIGHT SIDE
FINISH
FLANGE
LOWER FINISH FLANGE
BOTTOM COVER PANEL
Figure 13.6 Lower Cover Panel Positioned Correctly
RIGHT SIDE
FINISH
FLANGE
47