Heat & Glo XLR-N-AU Owner's Manual page 24

Fire Risk. Explosion Risk.
Do NOT pack insulation or other combustibles between ceiling fi restops.
• ALWAYS maintain specifi ed clearances around venting and fi restop systems.
• Install wall shield and ceiling fi restops as specifi ed.
Failure to keep insulation or other material away from vent pipe may cause fi re.
Top Vent - Horizontal Termination
Venting with 1 elbow
V Minimum H Maximum
1
90 Elbow 457 mm
305 mm 914 mm
610 mm 1.5 m
914 mm 2.1 m
1.2 m 4.3 m
H Max. =4.3 m
V + H Max. = 12.2 m
Figure 7.4
24
WARNING
H
1
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. C • 3/10
Note: Use SLP Series
components only.
V
1