Heat & Glo XLR-N-AU Owner's Manual page 2

Fireplace
Hide thumbs Also See for XLR-N-AU:
Table of Contents

Advertisement

MODELS: XLR-N-AU, XLR-PB-AU
ARE SAI GLOBAL APPROVED FOR
NATURAL GAS, PROPANE OR BUTANE
AS A BALANCED FLUE HEATER.
Refer to the appliance data plates for gas
consumptions and pressures.
Installation of this appliance should only be
carried out by an authorized person in ac-
cordance with the manufacturer's instruc-
tions. Appliance is to be installed in full
compliance with the National Gas Installa-
tion Standard AS5601, the manufacturer's
instructions, and any local authorities' re-
quirements for gas, electrical and building
regulations.
This appliance and its components are
tested and safe when installed in accor-
dance with this Installation Manual. Report
to your dealer any parts damaged in ship-
ment, specifi cally check glass condition.
The gas logs and fl ue system components
are in separate packages. Read all in-
structions before starting installation and
follow these instructions carefully during
Heat & Glo, a brand of Hearth & Home Technologies, Inc.
7571 215
th
Street West, Lakeville, MN 55044
Copyright 2009 • Printed in U.S.A.
2
PLEASE READ THIS MANUAL BEFORE INSTALLING
AND USING THIS APPLIANCE.
IMPORTANT: Read all instructions carefully before starting installation.
Failure to follow these installation instructions may result in a possible fi re
hazard and will void the warranty. Save this manual for future reference.
Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. C • 3/10
installation to ensure maximum benefi t and
safety. Failure to follow them will void your
warranty and may present a fi re hazard.
The Heat & Glo, a brand of Hearth & Home
Technologies Inc. warranty will be voided
by, and Heat & Glo, a brand of Hearth &
Home Technologies Inc. disclaims any re-
sponsibility for the following actions:
• Installation of any damaged heater or
fl ue system component
• Modifi cation of the heater or balanced
fl ue system installation other than as
instructed by Heat & Glo, a brand of
Hearth & Home Technologies Inc.
• Improper positioning of the gas logs or
the glass door
• Installation and/or use of any component
part not manufactured or approved by
Heat & Glo, brand of Hearth & Home
Technologies Inc., not withstanding any
independent testing laboratory or other
party approval of such component part
or accessory.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xlr-pb-au

Table of Contents