Invacare Pronto M71 Owner's Operator And Maintenance Manual page 32

SECTION 11—SAFETY INSPECTION/TROUBLESHOOTING
Inspect/Adjust Weekly
Inspect tires for flat spots and wear.
Inspect/Adjust Monthly
Ensure arm pivot points are free of wear and looseness.
Ensure wheel mounting bolts are secure on drive wheels.
Ensure no excessive side movement or binding when drive wheels are lifted and spun
when disengaged (free-wheeling).
Ensure wheel/fork assembly has proper tension when caster is spun. Caster should
come to a gradual stop.
As with any vehicle, wheels and tires should be checked periodically for cracks and
wear and should be replaced as necessary.
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
Ensure all caster/wheel/fork/headtube fasteners are secure.
Inspect for any loose hardware on the wheelchair.
Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify
hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
Inspect/Adjust Periodically
Ensure wheelchair rolls straight (no excessive drag or pull to one side).
Ensure arms are secure but easy to release and adjustment levers engage properly (on
ASBA only).
Ensure adjustable height arms operate and lock securely.
Ensure armrest pads sit flush against arm tubes.
Inspect seat and back upholstery for rips or sagging.
Ensure seat release latch is not worn. Replace if necessary.
Clean upholstery and armrests.
Inspect the seat positioning strap for wear. Replace if worn or damaged.
Inspect charger AC power cord for damage. Replace if necessary.
Check that all labels are present and legible. Replace if necessary.
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
® ™
Pronto M71 with SureStep
CAUTION
™ 32
Part No 1141449