Introduction; Specifications - Jet JWBS-20 Operating Instructions And Parts Manual

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model JWBS-20 Bandsaw. This manual contains instructions on installation, safety precautions,
general operating procedures, maintenance instructions and parts breakdown. This machine has been
designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.

Specifications

JWBS-20
Stock Number................................................................ 708754 ....................................................708755
Cutting Capacity (HxW)(in.) ......................................12-1/2 x 20 ..............................................12-1/2 x 20
Maximum Rip Left of Blade w/Fence (in.)......................... 18-1/2 ..................................................... 18-1/2
Maximum Rip Right of Blade w/Fence (in.)......................... 9-3/4 ....................................................... 9-3/4
Blade Length (in.) ................................................................ 150 ......................................................... 150
Minimum Blade Width (in.).................................................... 1/8 .......................................................... 1/8
Maximum Blade Width (in.)................................................ 1-1/2 ....................................................... 1-1/2
Table Size (in.) ...............................................................21 x 21 ...................................................21 x 21
Table Tilt (deg.) ......................................................... 45 R, 10 L ............................................... 45 R, 10 L
Table Height (in.)............................................................. 36-1/8 ..................................................... 36-1/8
Front Table to Center of Blade (in.)........................................ 11 ........................................................... 11
Wheel Diameter (in.)........................................................ 20-1/2 ..................................................... 20-1/2
Blade Speed (SFPM)........................................................ 3,450 ...................................................... 3,450
Dust Chute Diameter (in.) ........................................................ 4 ............................................................. 4
Overall Dimensions (HxWxD)(in.) ..................... 75-1/4 x 43 x 36 ...................................... 75-1/4 x 43 x 36
Motor (TEFC) ..............................................3HP,1Ph,230V only ...... 5HP,3Ph,230/460V (pre-wired 230V)
Net Weight, approx. (lbs.) .................................................... 535 ......................................................... 536
Shipping Weight, approx. (lbs.) ............................................ 612 ......................................................... 613
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.
6