Using 3D Functions; Viewing 3D Images; Display Mode Select; 3D Format Select - Toshiba 40L53** DIGITAL Series Owner's Manual

Before using 3D programming, see and follow
"Caution and Other Information for 3D" on
page 58.
Viewing 3D programming requires the fol-
lowing:
Toshiba FPT-AG03 (L53*5 : 2pcs supplied,
L53*3/L53*1 : Not supplied)
Compatible 3D playback device or 3D
source
3D capable high quality HDMI cable

Viewing 3D images

Incoming video signals can either be in 2D or
3D format. A 2D signal can be viewed in either
2D or 3D, and 3D can be viewed in either 2D
or 3D. If the TV can detect the fact that a signal
is 3D, it can change to 3D mode automatically
– see "3D Auto Start" on page 55.
Otherwise you can change the viewing mode
using the 3D button. Finally, the format of the
3D signal can be either Side by Side (SBS) or
Top and Bottom (TB). You may have to choose
the correct format if the TV can not detect it
automatically – see"Display Mode Select" on
page 54.
Moreover, you can change 2D images to 3D
images by pressing the 3D button when view-
ing in 2D.
NOTE:
When 3D format signal is not received,
display mode is not switched to 3D.
If appropriate mode and format are not se-
lected, 3D image is not correctly displayed.
There will be restrictions on the Picture
Size settings for 3D Mode and 2D Mode.
There are individual differences in percep-
tion of 3D images.
When viewing 3D images, wear the 3D
Glasses.
The 2D to 3D conversion function is acti-
vated and controlled by you according to
your personal preferences.
The 2D to 3D conversion function is meant
for enjoyment of 2D home video, and other
2D content you create, in 3D according to
your personal preferences.
The 2D to 3D conversion function is not
intended for use with pre-recorded 2D
copyrighted content owned by a third-party
unless the copyright owner has given direct
or indirect permission, or unless applicable
law permits such use.

Using 3D Functions

There are three modes for watching TV.
* This mode does not support all content de-
pending on its input source format.
1
1
2
3
NOTE: 3D Format Select is only available
54

Display Mode Select

3D*: Displays 3D images.
2D: Changes 3D images to 2D.
2D to 3D*: Changes 2D images to 3D.
Press 3D
play Mode.
Display Mode Select
Please select your desired setting.
Select

3D Format Select

Press QUICK
3D Settings and press
Select and press
3D Settings
3D Format Select
2D Format Select
2D to 3D Depth
Left and Right Image
Top and Bottom.
3D Format Select
Please select your desired setting.
Side by Side
Select
Side by Side: Images for the left and
right eyes are positioned
side-by-side.
Top and Bottom: Images for the left
when Display Mode Select is 3D.
-
Enter
OK
.
3D Format
.
OK
1
Normal
Side by Side or
Top and Bottom
Enter
OK
and right eyes are
positioned at the top
and bottom of the
screen.