Standby Update Control; Standby Channel Update; Channel Grouping; Common Interface - Toshiba 40L53** DIGITAL Series Owner's Manual

Standby Update Control

In the DTV Settings
Standby Update Control.
able.

Standby Channel Update

If the Standby Channel Update is set to On,
when the TV is in standby mode, Digital Tuning
is automatically executed and any new chan-
nels are saved.
In the DTV Settings
Standby Channel Update.
NOTE: Standby Channel Update is only
available when Standby Update Con-
trol is Enable.

Channel Grouping

There are Video, Radio and Text services
combined in a channel list for DTV services,
The function provides the selection of channel
change with one service group or among all
services by pressing P
In the DTV Settings
Channel Grouping.
Channels
Subtitle and Audio
Password
Parental
Local Time Setting
Standby Update Control
Standby Channel Update
Channel Grouping

Common Interface

Edit
When Channel Grouping is On, the
channel change by P
be within a single service group, press
ATV/DTV on the remote control can be
still used for change services among
ATV, DTV Video, DTV Radio and DTV
Text.
Enable or Dis-
On or Off.
and P
.
On or Off.
DTV Settings
OK
OK
OK
OK
22:17
Enable
Off
On
OK
Back
RETURN
and P
will
Common Interface
The Common Interface Slot, situated on the
side of the television, enables the insertion of
a CAM (Conditional Access Module) and card.
These are purchased from a service provider
and allow additional subscription broadcasts
to be viewed. For information, see a service
provider.
Insert the CAM and card into the Com-
mon Interface Slot, following the instruc-
tions provided with the CAM. A box will
CAM has been inserted.
In the DTV Settings
press to enter the submenu.
Details of the CAM should now be avail-
able.
NOTE: The software updating of CI Plus CAM
may be automatically executed. At
this time, any Recording/Reminder pro-
gramme timer will be cancelled.
28
Common Interface, and