By activating the Enable HDMI-LINK feature in the HDMI CEC Control menu, individual
HDMI-LINK features can then be activated.
One Touch Play
The function of HDMI CEC will automatically
power on the television that was in standby
mode and switch the television's input source
to the port connected with the audio/video
equipment by powering-on or playing from the
audio/video equipment.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Standby
This feature automatically switches the con-
nected equipment into standby when the
television goes into standby and conversely
for the television to switch into standby when
connected equipment goes into standby. It is
selected in the HDMI CEC Control menu.
NOTE: This feature is dependent on the
connected equipment and television
setting.
System Audio Control
Using the Speaker Preference feature allows
the television's remote control to adjust the
volume or mute the sound of the speakers con-
HDMI CEC equipment are selected in the input
source selection and that the Speaker Prefer-
ence is set to Ampli er in the HDMI CEC
Control menu.
NOTE:
its input source changed or the volume
adjusted, the sound will be output from
speakers has been selected. Turn the
television off then on again to output
the sound from the TV's speakers.
The full function may not work and is depend-
HDMI CEC Menus
When the Enable HDMI-LINK is set to On, it
allows the other functions to be enabled.
1
2
3
49
Enable HDMI-LINK
Press MENU
PREFERENCES and press
the submenu.
PICTURE
SOUND
SETUP
trol, and press
to enter the submenu.
PREFERENCES
3D Setup
HDMI CEC Control
Teletext
Panel Lock
Auto Format
4:3 Stretch
Blue Screen
Side Panel
DivX Registration
DivX Deregistration
Enter
OK
HDMI-LINK
On or Off.
HDMI CEC Control
Enable HDMI−LINK
Auto Power On
Auto Standby
Amplifier Control
Speaker Preference
Edit
to enter
APPLICATIONS
PREFERENCES
HDMI CEC Con-
OK
OK
Auto
Off
On
Off
On
1
OK
Back
RETURN
Enable
On
On
On
On
TV Speakers
Back
RETURN