3D Colour Management; Base Colour Adjustment; Digital Noise Reduction; Mpeg Nr - Noise Reduction - Toshiba 40L53** DIGITAL Series Owner's Manual

3D Colour Management

When 3D Colour Management is set to On, it
allows the Base Colour Adjustment feature to
become available.
You can adjust the picture colour quality by se-
lecting from 6 base colour adjustments : Red,
Green, Blue, Yellow, Magenta or Cyan.
In the PICTURE
select 3D Colour Management.
NOTE: When a DVD movie with subtitle is
playing back, this mode may not work
correctly.

Base Colour Adjustment

The Base Colour Adjustment feature allows
the adjustment of individual colours to suit per-
sonal preference. This can be useful when using
an external source. It only can be adjusted when
3D Colour Management is set to On.
In the PICTURE
to select Base Colour Adjustment and
press to enter the submenu.
to adjust and press
Base Colour Adjustment
Hue
Red 0
Green 0
Blue 0
Yellow 0
Magenta 0
Cyan 0
Reset
Edit
OK
or Brightness.
Base Colour Adjustment
Hue
Red
0
required.
NOTE: In the PC Input mode, this function is
not available.
On or Off.
.
Saturation Brightness
0 0
0 0
0 0
0 0
0 0
0 0
OK
Back
RETURN
Hue, Saturation
Saturation Brightness
0 0
38

Digital Noise Reduction

DNR Digital Noise Reduction enables you
to "soften" the screen representation of a weak
signal to reduce the noise effect.
In the PICTURE
select DNR.
dle or High.
NOTE: This function is not available for HDMI
input.
MPEG NR – Noise Reduction
When watching a DVD, the compression may
cause some words or picture elements to
become distorted or pixelated.
Using the MPEG NR feature reduces this ef-
fect by smoothing out the edges.
In the PICTURE
select MPEG NR.
dle or High.
Off, Low, Mid-
Off, Low, Mid-