Using 3D Functions; Viewing 3D Images; Switching Display Mode Or Selecting 3D Format - Toshiba REGZA YL76 Series Manual

CONTROLS AND FEATURES

Using 3D functions

Before using 3D programming, see and follow
"When using the 3D glasses" section on page 6.
Viewing 3D programming requires the following:
• TOSHIBA 3D Glasses FPT-AG01G (supplied)
• Compatible 3D playback device or 3D source
• 3D capable high quality HDMI cable

Viewing 3D images

Incoming video signals can either be in 2D or 3D format. A 2D
signal can only be viewed as 2D, but 3D can be viewed in either
2D or 3D. If the TV can detect the fact that a signal is 3D, it can
change to 3D mode automatically - see "3D Auto Start", below.
Otherwise the user can change the viewing mode using the 3D
button. Finally, the format of the 3D signal can be either Side by
Side (SBS) or Top and Bottom (TB). You may have to choose the
correct format if the TV can not detect it automatically - see "3D
format select", below.
NOTE:
• When 3D format signal is not received, display mode is not
switched to 3D.
• The 3D button is available in digital channels or HDMI input.
• If appropriate mode and format are not selected, 3D image
is not correctly displayed.
• There will be restrictions on the Picture Size settings for 3D
Mode and 2D Mode.
• There are individual differences in perception of 3D images.
• When viewing 3D images, wear the 3D Glasses.
Switching display mode or selecting 3D
format
There are three modes for watching TV.
Mode
3D Displays 3D images.
2D Changes 3D images to 2D.
Native Displays a received signal format as it is.
Description
3D format select:
If a right and left images are same in Native mode, select SBS.
If a top and bottom images are same in Native mode, select
TB.
3D formats are the following.
3D format
Side by Images for the left and right eyes are
Side (SBS) positioned side-by-side.
Top and Images for the left and right eyes are
Bottom (TB) positioned at the top and bottom of
the screen.
Frame Image for eyes of right and left for
Packing two frames are positioned at the top
(FP) * and bottom of the screen.
* This format cannot be selected manually.
To switch to 3D mode:
• Set PREFERENCES/3D Setup/3D Auto Start to 3D.
• Press 3D while viewing 2D mode or Native mode.
Input Signal
Type Additional
Info
3D With 3D Auto
Format Detect
Signal Information
Without 3D
Auto Detect
Information
2D Format Signal
* Correct 3D image
28
Description
Trigger of Switching
Display Mode
Press 3D
button
Format Source
Signal
FP
3D
*
3D
*
SBS
3D 3D
*
TB
3D
3D
*
SBS
3D 3D
D
3D
TB
D
3D
D 3
3D
3
3