Advertisement
Thank you for purchasing the ST-1000 AM/FM Weather Band Receiver from REI.
This product is designed and tested to withstand temperature and vibration extremes.
Please read the owner's manual carefully before attempting to install this unit.
If you have an installation question or need installation assistance, please call the:
SERVICE HOT LINE
1-877-726-4617 Toll Free USA & CANADA
1-402-339-2200
IF ADDITIONAL INSTALLATION COMPONENTS ARE NECESSARY, CONTACT YOUR REI
SALES REP FOR:
** OEM /FACTORY WIRING HARNESS ADAPTERS
** ANTENNAS & ANTENNA ADAPTERS
** SPEAKERS & GRILLS
Radio Engineering Industries, Inc.
6534 "L" Street
Omaha, Nebraska 68117
www.radioeng.com
FEATURES:
Non-volatile memory back-up
NOAA® Weather Band Receiver
AM/FM Stereo Receiver
Small Compact Chassis
Digital Tune and Seek
Preset Up to 30 Radio Stations (18 FM, 12 AM, 7 WB)
Front Aux Input (3.5mm Stereo jack)
Volume Select Knob
Electronic Bass, Treble, & Balance control
LED Backlighting
Output Power 50W x 2
2
INSTALLING THE RADIO
1. Place the DIN collar into the dash opening. Bend the tabs outward as shown on
the drawing below to lock into place.
Bend tabs both top
and bottom of Din Collar
to secure
2. Connect to the radio's harness and antenna jack. Verify clearance; then gently
insert the radio into the DIN Collar until both sides lock
3. To remove the radio, insert the two release keys on either sides of the radio and pull
the radio out.
Din Collar
Dash
.
Din Collar
Radio
7
Advertisement
