Kenwood DNX5120 Instruction Manual page 76

Setup Menu
Registering Bluetooth Unit
Registers the Bluetooth unit to be connected.
o
Display the Connect Device List screen
D
Search for a Bluetooth unit
OJ
Displays the registered Bluetooth unit.
Displays the busy service in red. Displays
the available service in gray.
W
Scrolls the name of the Bluetooth unit.
W
Searches for Bluetooth unit.
@]
Registers Bluetooth unit that cannot be
registered by normal register (paring)
operation.
W
Returns to the previous screen.
Q
~
. A new device cannot be registered if there are 5
registered Bluetooth units. Delete unnecessary
registration. See <Deleting Bluetooth Unit> (page 78).
D
Select the Bluetooth unit to register
W
Displays the searched Bluetooth unit.
[1]
Scrolls the name of the Bluetooth unit.
[]J
Cancels searching of Bluetooth unit.
[]] Starts search.
ITQ]
Scrolls.
[]JJ
Returns to the previous screen.
76 ONXS120/0NXS12EX/OOXS12/00XS032
II
Enter PIN code
Enter the PIN code specified for the Bluetooth
unit to register.
[g]
Enters a code number.
ITIJ
Cancels registration of PIN code.
[H]
Enters PIN code.
~ Clears the code number.
Q
~
• You can also register from the Bluetooth unit side. For
the PIN code necessary for registration, see <Registering
Bluetooth Unit PIN Code> (page 77).
If the error message appears even though the PIN code
is correct, try <Registering Special Bluetooth Unit> (page
77).