Kenwood DNX5120 Instruction Manual page 51

Setting Up the Hands-Free Phone
The Hands-Free system can be set as follows.
o
Display the Hands Free Setup screen
Han Fr ....
Ol
1<Ol~
.....
Qunu @JI
D
Setup each item
an F ...,;
Ol _~ .....
Qunu
@JI
IT]
Moves to the "Hands Free Setup
2"
screen.
[I]
Sets an automatic response time after call
termination.
(12]
"8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
[l]
Sets a ringing tone output position.
(12]
"Front R")
"Front
L":
Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
W
Sets the beep of the incoming call.
(12]
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
lID
Sets the beep of the incoming SMS.
(12]
"ON")
"ON": Beep is heard.
"OFF": Beep is canceled.
[]] Returns to the Hands-Free Control screen.
[I]
Returns to the "Hands Free Setup 1" screen.
W
Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
(12]
"ON")
"ON": Yes.
"OFF":No.
W
Sets the SMS function. (~ "ON")
"ON": Use SMS function.
"OFF":SMS not available.
[Q]
Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Recognition> (page
53).
(ITJ
Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 54).
~ Returns to the Hands-Free Control screen.
~
~
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
• Select the speaker which is further from the microphone
in order to prevent howling or echoes.
English1851