•
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will
be displayed for 3 seconds.
•
To end auto-scan, press CHANNEL or MEMORY
with the Temperature / Humidity Area selected.
NOTE If you select a sensor that collects only
temperature data, the humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
•
Press MEMORY repeatedly to view current,
maximum and minimum records for the selected
sensor.
•
To clear the records, press and hold MEMORY for 2
seconds. A beep will sound to confirm that the
memory has been cleared
VIEW TEMPERATURE AND HUMIDITY HISTORY
To view the last 24 hours temperature and humidity
history, navigate to the Temperature or Humidity Area.
Then press HISTORY repeatedly to scroll through the
measurements. The number shown to the right of the
display indicates how long ago each measurement was
taken (e.g., 2 hours ago, 3 hours ago, etc.).
Temperature history:
Humidity history:
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
humidity readings.
TREND
RISING
TEMPERATURE
HUMIDITY
21
STEADY
FALLING