Getting Started; Batteries; Ac Adaptor (Main Unit) - Oregon Scientific BAR933HG User Manual

GETTING STARTED

BATTERIES

Batteries are supplied with this product:
•
Main unit
•
Remote unit
Insert batteries before first use, matching the polarity as
shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
To install the main unit batteries:
NOTE Do not use rechargeable batteries.
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
shows when batteries are low.
UNIT
Main
4 x UM-4 (AAA) 1.5V
2 x UM-3 (AA) 1.5V
Remote
UV Sensor

AC ADAPTOR (MAIN UNIT)

The batteries serve as a back-up power supply. For
continuous use, please install the AC adaptor at the
base of the unit:
adapter is not plugged in.
10
LOCATION
Temperature / Humidity Area (when
indoor data is displayed)
Temperature / Humidity Area
UVI / Barometric Pressure Area
shows in the Message Display Area when the AC