Select Sensor Channel; Minimum / Maximum Records; Temperature And Humidity Trend; Comfort Zone - Oregon Scientific BAR321 User Manual

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 5.
The house icon shows the selected
remote sensor.
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL and MEMORY with the Temperature /
Humidity Area selected.
NOTE If you select a sensor that collects only
temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

Press MEMORY repeatedly to view current, maximum
and minimum records for the selected sensor. To clear
the records, press and hold MEMORY for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.

TEMPERATURE AND HUMIDITY TREND

The trend lines are shown next to the Temperature and
Humidity readings.
TREND RISING
ICON

COMFORT ZONE

The Comfort Zone indicates how comfortable the climate
is, based on current temperature and humidity
measurements.
ZONE TEMPERATURE
Any
20 – 25 ° C
(68 - 77 ° F)
Any
This information is shown in the Humidity Area when
the current measurement is displayed.
18
STEADY FALLING
HUMIDITY
>70%
40 – 70%
<40%