Table of Contents
Advertisement
5.
Press ALARM /
to confirm.
6.
shows when the Pre-Alarm is set.
NOTE The Daily Alarm will NOT function until the next
day if the Pre-Alarm has been triggered. Also, if you
deactivate the Daily Alarm, the Pre-Alarm is
automatically deactivated.
ACTIVATE ALARM
Navigate to the Clock Area, then press ALARM /
switch to Daily Alarm or Pre-Alarm view. To activate or
deactivate the alarm, press UP or DOWN.
When the alarm time is reached, the backlight will be on
for 5 seconds and crescendo alarm will sound for 2
minutes. Press any key (except snooze) to silence the
alarm. It will sound at the same time the next day.
SNOOZE
Press SNOOZE / LIGHT to temporarily disable the alarm
,
for 8 minutes.
, or
or
Snooze is on.
BAROMETER
This product tracks fluctuations in barometric pressure to
provide the weather forecast, and the current and past
24 hours barometric pressure history measurements are
recorded by the main (indoor) unit.
VIEW BAROMETER AREA
Press SELECT to navigate to the Barometer Area.
to
If
is NOT shown, press MODE.
SELECT MEASUREMENT UNIT
Slide the mb / inHg switch (in the battery compartment),
to change the display unit.
will blink while
VIEW BAROMETER HISTORY
To view the last 24 hours barometric history, navigate to
the Barometer Area. Then press HISTORY repeatedly to
scroll through the measurements. The number shown in
the HR box indicates how long ago each measurement
was taken (e.g. 2 hours ago, 3 hours ago, e.t.c.).
17
Advertisement
Table of Contents
