Weather Forecast; Weather Forecast Icons; Temperature; Maximum / Minimum Records - Oregon Scientific BAR289 User Manual

WEATHER FORECAST

This product forecasts the next 12 to 24 hours of weather
within a 30-50 km (19-31 mile) radius. The forecast is
based on barometric pressure trend readings.
VIEW BAROMETER AREA
The LCD display shows an animated icon indicating the
forecasted weather.

WEATHER FORECAST ICONS

ICON DESCRIPTION
Clear
Day / Night
Partly cloudy
Day / Night
Cloudy
Rainy
Snowy
NOTE
The night time icon displays from 6 PM to 6 AM.

TEMPERATURE

This product can display maximum, minimum and
current temperatures collected by the remote sensors
and main (indoor) unit.

MAXIMUM / MINIMUM RECORDS

• Press MEMORY to toggle between maximum (MAX),
minimum (MIN) and current records.
• To clear the records, press and hold MEMORY for
2 seconds. A beep will sound to confirm that the
memory has been cleared.

SELECT MEASUREMENT UNIT

Press the °C / °F button to choose the setting you want.
The display can show indoor temperatures ranging
from -5°C to +50°C (23°F to +122°F).
BAR289 ENG R5
All manuals and user guides at all-guides.com
8
8

BACKLIGHT

To turn on the backlight for 5 seconds:
• Press MODE / LIGHT on the main unit.
OR
• Press on the remote control.
NOTE When appears, the backlight function is
deactivated due to low-battery power. Replace with new
batteries to operate this function again.

RESET SYSTEM

Insert a thin blunt instrument into the hole below RESET
to return to the default settings.
NOTE When you press RESET, all settings will return
to default value, and you will lose all stored information.

REMOTE CONTROL (RE289)

The remote control interacts with the main unit using
infrared technology.
The buttons on the remote control complete the same
functions as the buttons on the front of the main unit.
Refer to the following list of functions and see the relevant
section headings for further information:
• Manually view 1 of 5 sensor channel's data or view
each channel for 3 seconds using auto-scan - see
"Select Sensor Channel".
• Force a manual search for the RF clock reception -
see "Radio-Controlled Clock".
• Enable / disable the radio-controlled clock - see "Turn
Radio-Controlled Clock On / Off".
• Manually set the clock, calendar and day of the week
language - see "Set Clock".
• View the 5 different clock displays - see "Switch Clock
Display".
• View the alarm settings, set the alarm, activate the
alarm and silence the alarm - see all of "Alarm"
section.
• View temperature records - see "Maximum /
Minimum Records".
NOTE The sensor auto-search function cannot be
operated by the remote control.
NOTE
The main unit must be no more than 4 metres
(13 feet) from the remote control for a successful
connection to take place. Point the remote control directly
at the infrared window on the main unit for optimal
performance. The remote control cannot perform when
there is an obstacle between the 2 units.
7/28/04, 12:35 PM