Temperature And Humidity; View Temperature And Humidity Area; Select Measurement Unit; Select Sensor Channel - Oregon Scientific BAR988HG User Manual

NOTE The UV sensor must be activated before you
try and set the additional features. Please refer to the
UVR138 User Manual for more information.

TEMPERATURE AND HUMIDITY

The weather station can display the following information
from any of the 5 remote sensors:
• Current, minimum, and maximum temperatures
and relative humidity percentages.
• Comfort level indicator and trend line (rising,
falling, or steady).
Data is collected and displayed approximately every
60 seconds.

VIEW TEMPERATURE AND HUMIDITY AREA

Press SELECT to navigate to the Temperature and
Humidity Areas.
Temperature data is given at the top; Humidity is below.
BAR988HG English R0

SELECT MEASUREMENT UNIT

Slide the °C / °F switch (inside the clock battery
compartment), to the setting you want.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1-5.
The house icon shows the selected remote sensor.
• To auto-scan between sensors, press and hold
• To end auto-scan, press CHANNEL or MEMORY
NOTE
temperature data, the humidity will not be shown.

MINIMUM / MAXIMUM RECORDS

• Press MEMORY repeatedly to view current,
• To clear the records, press and hold MEMORY
20
20
CHANNEL for 2 seconds. Each sensor's data will
be displayed for 3 seconds.
with the Temperature / Humidity Area selected.
If you select a sensor that collects only
maximum and minimum records for the selected
sensor.
for 2 seconds. A beep will sound to confirm that
the memory has been cleared.
7/27/04, 3:42 PM