Advertisement
SAFETY INFORMATION
Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
b) Block chassis before working underneath golf car;
c) Before disconnecting any part of the fuel system, drain the system and turn all valves, if so equipped, to the "off" posi-
tion to prevent leakage or accumulation of flammable fuels;
d) Avoid fire hazards and have fire protection equipment available;
e) Before performing any maintenance on an electric golf car, disconnect the electrical system in accordance with the
manufacturer's instructions;
f) Use only properly insulated tools when performing maintenance;
g) Periodically inspect and maintain brakes, steering mechanisms, warning devices, governors, safety decals and all
other safety devices and maintain them in a safe operating condition. Do not modify these devices unless instructed to
do so by the manufacturer;
h) After each maintenance or repair, have the golf car driven by qualified and trained personnel to ensure proper opera-
tion and adjustment; perform validation checks in an area that is free of vehicular and pedestrian traffic;
i) Record all maintenance performed in a maintenance record log by date, name of person performing maintenance and
type of maintenance. Controlling Party should periodically inspect maintenance log to ensure currency and complete-
ness of entries.
6.2.4.
The controlling party shall maintain all Danger, Warning and Caution labels, (collectively and individually "safety labels");
nameplates; serial numbers; and instructions, when supplied by the manufacturer, in a legible condition.
6.2.5.
The controlling party shall not perform or allow to be performed, any modification or addition to the vehicle that affects
capacity or safe operation, or make any change not in accordance with the manufacturer's operations and service man-
uals, without the manufacturer's prior written authorization. Where authorized modifications have been made, the con-
trolling party shall ensure that capacity, operation, warning, and maintenance instruction plates, tags, or decals are
changed accordingly.
6.2.6.
As required in 6.2.4, the manufacturer shall be contacted to secure new nameplates, warnings, or safety labels, as nec-
essary, which shall be affixed in their proper place on the golf car if and as designated in the owner's manual.
7.
FUELS HANDLING AND STORAGE/BATTERY CHARGING
7.1. Ventilation
Maintenance and storage areas shall be properly ventilated to avoid fire hazards in accordance with applicable fire
codes and ordinances.
Ventilation for internal combustion engine golf cars shall be provided to remove flammable vapors, fumes and other
flammable materials. Consult applicable fire codes for specific levels of ventilation.
Owner's Manual and Service Guide
Page xvii
Hide quick links:
Advertisement
