HighPoint RocketRAID 174x User Manual page 45

2. If the original driver is installed in the /lib/modules/'uname –r'/kernel/drivers/
scsi/ directory, and loaded by the script file (Example /etc/init.d/hptdriver) during
the init process, or the configure file (Example /etc/modules.conf), please replace
it with the new driver (rr174x.o or rr174x.ko).
5 Installing the RAID Management Software
The HighPoint RAID Management Software is used to configure and keep track of
your hard disks and RAID arrays attached to RR174x controller. Installation of the
management software is optional but recommended. To configure HighPoint RAID
Management Software to work with RR174x driver, you should setup /etc/hptcfg to be
the driver name: # echo RR174x > /etc/hptcfg Please refer to HighPoint RAID Man-
agement Software documents for more information.
6 - Uninstalling the Driver
To uninstall the RocketRAID 174x driver
Note: The driver cannot be uninstalled while the system is booted from a disk or array
attached to the RocketRAID 174x.
To uninstall the driver, remove the lines added to /etc/fstab, and remove the files
created in the /etc/init.d directory.
Linux Driver Support
5-4