B-300 HDMATRIX Installation and Users Manual 4X4 & 8X8
10.1.2 Turn Off (Mute) Outputs
Mute one Output Example: Output=1
1. Press OUTPUT
2. Press Number Key (1-8) to select Output
3. Press OUTPUT OFF
4. Press ENTER
Mute All Outputs
1. Press OUTPUT
2. Press ALL to select All Outputs
3. Press OUTPUT OFF
4. Press ENTER
10.1.3 Display Output Status
Example: Input=3
1. Press STATUS
2. Press OUTPUT
3. Press Number Key (1-8) to select one Output
4. Press ENTER
10.1.4 Resetting to Factory Defaults
This procedure resets the B-300-HDMATRIX to factory defaults:
· EDIDs - 1080i Stereo (embedded 8)
· I/O - All Outputs set to Input 1
· 1CAT EDIDs cleared, DHCP (8x8 only) - Enabled.
Reset Factory Defaults
1. Press DEFAULT
2. Press DEFAULT
3. Press DEFAULT
4. Press DEFAULT
5. Press ENTER
Note that resetting factory defaults can take up to 2 minutes to complete.
pg.18
Display Readout (Example)
--
1-
10
10
Display Readout (Example)
--
A-
A0
40
Display Readout (Example)
Example Out-
put=3, Input=4
--
--
3-
34
Display Readout
(Example)
E-
--
--
DD
D-
Example Out-
put=3 Muted
--
--
3-
30