Turn Signal On - Hummer H2 2009 Owner's Manual

Hide thumbs Also See for H2 2009:
Table of Contents

Advertisement

TRACTION CONTROL OFF
This message displays when you turn off the Traction
Control System (TCS) or when the TCS has been
automatically disabled. Adjust your driving accordingly.
See Traction Control System (TCS) on page 4-9
®
and StabiliTrak
System on page 4-6 for more
information.
TCS may be automatically disabled due to overheating,
which could occur if the TCS activates continuously
for an extended period of time.
TRANSMISSION HOT IDLE ENGINE
Notice: If you drive your vehicle while the
transmission fluid is overheating and the
transmission temperature warning is displayed
on the instrument panel cluster and/or DIC, you
can damage the transmission. This could lead to
costly repairs that would not be covered by your
warranty. Do not drive your vehicle with overheated
transmission fluid or while the transmission
temperature warning is displayed.
This message displays along with a continuous chime
if the transmission fluid in the vehicle gets hot. Driving
with the transmission fluid temperature high can cause
damage to the vehicle. Stop the vehicle and let it idle to
allow the transmission to cool. This message clears and
the chime stops when the fluid temperature reaches a
safe level.

TURN SIGNAL ON

This message displays and a chime sounds if a turn
signal is left on for 3/4 of a mile (1.2 km). Move the turn
signal/multifunction lever to the off position.
WASHER FLUID LOW ADD FLUID
This message displays when the windshield washer fluid
is low. Fill the windshield washer fluid reservoir as soon
as possible. See Engine Compartment Overview on
page 5-14 for the location of the windshield washer
fluid reservoir. Also, see Windshield Washer Fluid
on page 5-37 for more information.
3-63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents