Outside Automatic Dimming Mirror; Park Tilt Mirrors - Hummer H2 2009 Owner's Manual

4. Press (C), to fold the mirrors out to the driving
position.
5. Press (D) to fold the mirrors in to the folded
position.
If the mirrors are accidentally folded/unfolded manually,
they may shake or flutter at normal driving speeds
and may not stay in the unfolded position. If this
happens, you will need to reset the mirrors.
See "Resetting the Power Foldaway Mirrors" next.
Resetting the Power Foldaway Mirrors
You will need to reset the power foldaway mirrors if the
following occurs:
•
The mirrors are accidentally obstructed while
folding.
•
They are accidentally manually folded/unfolded.
•
The mirrors will not stay in the unfolded position.
•
The mirrors shake and flutter at normal driving
speeds.
To reset the power foldaway mirrors, fold and unfold
them three times using the mirror controls. This will reset
them to their normal position.
2-48

Outside Automatic Dimming Mirror

If the vehicle has this feature, the driver outside
mirror adjusts for the glare of the headlamps behind
you. See Automatic Dimming Rearview Mirror on
page 2-47 for more information.

Park Tilt Mirrors

The vehicle's outside mirrors can also perform a park tilt
function. This causes the passenger and/or driver's mirror
to tilt to a preselected position when the vehicle is in
R (Reverse). This feature may be useful in viewing the
curb when parallel parking.
When the vehicle is shifted out of R (Reverse) and a
short delay has occurred, the passenger and/or driver's
mirror will return to its original position.
To change the preselected tilt position, adjust the
mirrors to the desired position while the vehicle is
in R (Reverse). When the vehicle is shifted out of
R (Reverse), this new position is saved in memory
as the tilt position.
This feature can be enabled/disabled through the Driver
Information Center. See DIC Vehicle Customization
on page 3-64 for more information.