Front Turn Signal And Parking Lamps; Daytime Running Lamps (Drl) - Hummer H2 2009 Owner's Manual

Front Turn Signal and Parking
Lamps
To replace a front turn signal or parking lamp bulb:
1. Open the hood. See Hood Release on page 5-12.
3. Pull the bulb from the bulb socket.
4. Push the new bulb straight into the socket until it
clicks.
5. Turn the bulb socket clockwise until it locks into
place.
5-52
2. Turn the bulb socket
counterclockwise and
remove it from the lamp
housing.

Daytime Running Lamps (DRL)

To replace a daytime running lamp bulb:
2. Turn the bulb socket counterclockwise and remove
it from the lamp housing.
3. Remove the bulb from the bulb socket.
4. Push the new bulb straight in the bulb socket until it
clicks.
5. Reinstall the bulb socket into the lamp housing and
turn it clockwise until it locks.
1. Locate the lamp
assembly behind the
front bumper through
the wheel opening.