Omron Walking styleX Instruction Manual page 6

5.2 Setting the Time, Weight, Height and Stride Length
When you use the unit for the first time or you want to change
settings, follow the steps below.
1 Press the SET button on the back of the unit with
a thin, sturdy, stick that will not break easily.
Note: Do not press the button with a sharp point. This
could cause damage.
The hour flashes on the display.
Note: If no settings are made for more than 5 minutes...
• When setting up the unit for the first time
→ The display will be turned off.
• When adjusting the settings
→ The display will revert to the Target display.
* Setting range details refer to Chapter 14 "Technical data".
2 Setting the hour.
(1) Press
value for a setting.
• Press
• Hold
rapidly.
(2) Press
3 Repeat steps (1) to (2) to set the minute.
4 Repeat steps (1) to (2) to set the weight.
5 Repeat steps (1) to (2) to set the height.
6 Repeat steps (1) to (2) to set the stride length.
This completes the setup.
6 Using the OMRON Walking style X
6.1 Assemble the OMRON Walking style X
1 Attach the strap to the unit.
2 Attach the clip to the strap.
3 Open and close the clip.
Note: Press the clip open to
remove the unit.
Depending on the material, the clip may cause damage or
scratches to your clothes if it is attached or removed
roughly.
6.2 How to attach the OMRON Walking style X
We recommend attaching the unit to your belt, your pocket,
your bag or hanging it from your neck.
4
or to select the desired
( ) to advance (go back) one.
( ) down to advance (go back)
to confirm the setting.
1 2 3