Do you have a question about the HJ-150 and is the answer not in the manual?
Questions and answers
İsmet Saatçı
April 17, 2025
Omron Walking style One adım sayar aletini, gösterilen talimata uygun ayarlıyorum. Saat, ağırlık, adım aralığı girişlerini yaptım. Onlar aktif halde ekranda gözüküyor. Yalnız sayaç çalışmıyor; bir saat, aynı tempoda yürüyorum; gösterge sürekli sıfırda kalıyor. Ne yapmam gerekiyor?
1 comments:
Mr. Anderson
May 9, 2025
If the Omron HJ-150 pedometer is not counting steps despite correct settings, check the following:
1. Proper Positioning: Ensure the unit is positioned horizontally and attached correctly on the hip. Incorrect positioning may cause inaccurate step counts.
2. Walking Duration: Walk continuously for more than 4 seconds. The device does not count steps during the first 4 seconds unless walking continues beyond that.
3. Battery Check: Make sure the battery is not dead. Replace it with a CR2032 battery if needed.
This pedometer is a great motivational tool to track the number of steps you take. The power saving feature on this pedometer continues to record your activity even when the display has automatically turned off. Your HJ-150 comes with the following components: Pedometer Battery (CR2032 installed)
IMPORTANT SAFETY INFORMATION CARE AND MAINTENANCE Do not disassemble or modify the unit. Changes or modifications not approved by Omron Healthcare will void the user warranty. Do not subject the unit to strong shocks, such as dropping the unit on the floor.
KNOW YOUR UNIT KNOW YOUR UNIT FRONT OF UNIT Display BACK OF UNIT SET Button SYSTEM RESET Button The unit comes with the battery installed. Set the unit by using a thin stick that is not easily breakable. MEMO Button Clip/Battery Cover Battery Cover Screw SETTING THE TIME...
SETTING THE TIME Press the SET Button to set the hour. The minutes flash on the display. Press the MEMO Button to advance by increments of one minute. Press and hold the button to advance the time in 10 minute increments. Press the SET Button to set the minute.
ATTACHING THE PEDOMETER The unit may not count steps correctly in the following conditions: 1. Incorrect unit position • When the front of the main unit is placed at an angle of less than 60° (shown to the right) or horizontal to the ground. 2.
USING THE MEMORY FUNCTION This unit can store and display up to seven days of previous data. The current day’s data is automatically stored in memory when the time reaches 12:00AM. The display will return to 0. NOTE: The time must be correctly set in the unit. How to view data stored in the memory Press the MEMO Button.
BATTERY INSTALLATION The battery is installed in the pedometer when this unit is purchased. Low Battery Indicator When the Low Battery Indicator appears on the display, immediately replace the battery with a new CR2032 battery. When the battery is removed from the unit the settings and all data stored in the memory will be erased.
CAUTION Do not disassemble or modify the unit. Changes or modifications not approved by Omron Healthcare will void the user warranty. Clean the unit with a soft dry cloth. Do not use any abrasive or volatile cleaners.
WARRANTY Limited Warranty Your Omron HJ-150 Pedometer, excluding the battery, is warranted to be free from defects in materials and workmanship appearing within 1 year from the date of purchase, when used in accordance with the instructions provided with the unit.
Need help?
Do you have a question about the HJ-150 and is the answer not in the manual?
Questions and answers
Omron Walking style One adım sayar aletini, gösterilen talimata uygun ayarlıyorum. Saat, ağırlık, adım aralığı girişlerini yaptım. Onlar aktif halde ekranda gözüküyor. Yalnız sayaç çalışmıyor; bir saat, aynı tempoda yürüyorum; gösterge sürekli sıfırda kalıyor. Ne yapmam gerekiyor?
If the Omron HJ-150 pedometer is not counting steps despite correct settings, check the following:
1. Proper Positioning: Ensure the unit is positioned horizontally and attached correctly on the hip. Incorrect positioning may cause inaccurate step counts.
2. Walking Duration: Walk continuously for more than 4 seconds. The device does not count steps during the first 4 seconds unless walking continues beyond that.
3. Battery Check: Make sure the battery is not dead. Replace it with a CR2032 battery if needed.
These steps help ensure accurate step counting.
This answer is automatically generated