Napoleon STARfire GD70NT-S Installation And Operation Instructions Manual page 15

PROTRUDING FINISH
Non-combustible material (brick, stone or ceramic tile) may
protrude over the black painted surface of the fireplace
front and is required for use in conjunction with the GD425
kit. This kit is designed to accommodate a noncombus-
tible material to a maximum finished thickness of
BLACK PAINTED FIREPLACE
SURFACE
Tiles must not pro-
trude past the inner
edge of the fireplace
frame to avoid inter-
ference with
GD425 installation.
FLUSH FINISH
To install the fireplace face flush with the finished wall,
position the framework to accomodate the thickness of the
finished wall.
MAINTAIN THESE MINIMUM CLEARANCES TO COM-
BUSTIBLES:
Fireplace framing - 0" to stand-offs (rear & sides only)
Fireplace finishing - 3" to sides, 10" to top of unit
FIGURE 30
3 / ".
4
TILES
FIGURE 29
the
GD425
FIGURE 31
FIGURE 32
FIGURE 33
MINIMUM MANTLE, FRAMING AND ENCLOSURE
CLEARANCES
* When using the optional ornamen-
tal facia and panels, the minimum height from the top of
the unit to the mantle is 7".
15
WARNING:
Use only
non-
combustible
material
such as
cement
board,
ceramic tile,
marble, etc.
when
finishing to
the fireplace.
DO NOT USE
WOOD
FIGURE 34
W415-0434 / D / 09.06.07