Table of Contents
Advertisement
Programme options
Adjust Sensor wash
You can adjust the Sensor wash pro‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
Open the door.
Switch the dishwasher off with the
button, if it is switched on.
Press the programme selector button
in, and whilst holding it in switch
the dishwasher on using the but‐
ton.
Keep the programme selector button
pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
50
Press the Short button 5 times.
The Short indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicates whether Adjust sensor wash is
activated or not.
– : "Adjust sensor wash" activated
– : "Adjust sensor wash" switched
off
Press the programme selector button
if you wish to change the setting.
The setting is now stored in memory.
Switch the dishwasher off with the
button.
Hide quick links:
Advertisement
Table of Contents
