General problems
Problem
Detergent residue is left
in the dispenser at the
end of a programme.
The detergent dispens‐
er lid cannot be closed
properly.
At the end of a pro‐
gramme there is a film
of moisture on the in‐
side of the door and the
interior walls.
Water remains in the
wash cabinet at the end
of a programme.
Cause and remedy
The dispenser was still damp when detergent was
added.
Make sure the dispenser is dry before adding de‐
tergent.
Clogged detergent residue is blocking the catch.
Clean the detergent from the catch.
This is caused by the drying system and does not in‐
dicate a fault. The moisture will dissipate after a
while.
Before rectifying the problem:
Switch the dishwasher off with the button.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see "Cleaning and
care, Cleaning the filters").
The drain pump or non-return valve may be blocked.
Clean the drain pump or the non-return valve (see
"Maintenance").
The drain hose is kinked.
Remove any kink from the drain hose.
Problem solving guide
67