Switching Off; Unloading The Dishwasher - Miele HG06 Operating Instructions Manual

Switching off

At the end of a programme:
 Open the door.
 The dishwasher can be switched off
at any time using the  button.
Switching the dishwasher off during a
programme stops the programme.
Switching the dishwasher off during the
run-up to a delay start time (FlexiTimer)
will also stop the process.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comforta‐
ble enough to handle before unloading
them.
If you open the door fully after switch‐
ing off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from fall‐
ing onto the dishes in the lower basket.
Operation
43