Energy Management; At The End Of A Programme - Miele HG06 Operating Instructions Manual

Operation

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes af‐
ter the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme op‐
tions, Optimise standby").
 Press the  button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
42

At the end of a programme

At the end of a programme, the In-op‐
eration indicator light will be visible
flashing slowly with the door shut. The
buzzer might also be sounding.
The programme has ended when .
shows in the display.
The drying fan may continue to run for
a few minutes at the end of the pro‐
gramme.
 The dishwasher can now be opened
and unloaded.

To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery. Alter‐
natively you can open the door fully
until the crockery is cool enough to
unload. Do not leave the door only
partially open.