Using Callback; Storing A Callback; Accepting A Callback - Siemens OpenStage 40 T User Manual

Basic functions
Step by Step
Callback?
Cancel callback?
44

Using callback

If your belongs to an ONS group (parallel call
page 121), please note the following:
Callback on busy is only signaled on the busy
phone, not in the whole ONS group.
Callback on no reply is entered in the mailbox
( page 24) on all internal system phones in an
ONS group.

Storing a callback

Prerequisite: The internal station called is busy or no-
body answers.
Confirm the option shown.
If the called party was busy, the callback is auto-
matic.
If the called party did not answer, a message is
left in the called party's mailbox.

Accepting a callback

Prerequisite: The internal station called was busy. You
have saved a callback.
Z
Your telephone rings.
^
Lift the handset. You hear a ring tone.
or
n
Press the key shown. You hear a ring tone.
If the party has activated call forwarding
( page 38), you will receive the callback from
the call forwarding destination.
Cancel call backs
Confirm the option shown.
or Do not answer the call. After ringing four times, the call-
back is canceled.