Stamina 55-6100U Owner's Manual page 8

ASSEMBLY INSTRUCTIONS
STEP 8
Slide the UPPER UPRIGHT(2) onto the LOWER UPRIGHT(1) and secure with BUTTON HEAD BOLTS
(M8 x 16mm)(88).
STEP 9
To install the two ROPES(22) into the PULLEY FRAMES(15) on the LOWER UPRIGHT(1), remove the
PULLEY(16) from the PULLEY FRAME(15), place the ROPE(24) into the PULLEY FRAME(15) and attach
the PULLEY(16) back to the PULLEY FRAME(15) with ROUND HEAD BOLT(M6 x 14mm)(76) and BARREL
NUT(74). Repeat on the other side.
STEP 10
Attach the upper ends of the SPRINGS(27) to the bracket on the UPPER UPRIGHT(2). Hook the lower
ends of the SPRINGS(27) to the SPRING HOOKS(26) on the LOWER UPRIGHT(1).
STEP 11
Attach the UPPER UPRIGHT GUARD(100), the one with "GYROTONIC" printing, and the LOWER UPRIGHT
GUARD(101), the one with "1000" printing, onto the the UPPER UPRIGHT(2) with ROUND HEAD
BOLTS(M5 x 12mm)(79).
BRACKET
8
STEP 8, 9, 10 & 11